Kosh Module: Update 4

Now the Schematics and the Eagle Files have been updated into Source Forge. A single non-Isolated 5V CAN Transceiver is used SN65HVD251 with a resistive Level conversion for the 3.3V circuit. Also included is a button for Reset and a dedicated button for the VSCP Init function.
Here is a picture of the current schematics:

Possibly the SD card connector that I use needs to be pictured.

As we can see from the picture only 7 pins are used. The Kosh module also gives provision for this connector only(8th pin in NC). Possibly in the future we can look for a real SD card connector on board. But this trick was real neat so I am following it.

The technique used here is taken from dharmanitech.com’s SD card Article.

Let me know your suggestion to make this project Better.

Advertisements

About boseji

Bharteya Anusandhankarta ( Indian Researcher)
This entry was posted in CAN, electronics, embedded, KOSH, PIC, programming, Schematics, VSCP. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s