Category Archives: LPC

mbed a world of things: Intersting Links

Here are a few interesting links from mbed that might be helpful in case there are any of your ideas on the same lines: SD Card Cookbook Page Showing the File System Driver for SD Cards on mbed SD File … Continue reading

Rate this:

Posted in ARM, LPC, mbed, NXP | Leave a comment

Pro-Mboard: Development Board for Mbed Preview Pictures

Recently, We were able to Soldered and test the Pro-Mboard that we posted earlier. Here are a few Pics: Top View Bottom View However we quickly noticed a problem that the Rev0.1 had a non connected ground in USB connector … Continue reading

Rate this:

Posted in ARM, Design Challenge, Development Kit, electronics, embedded, FT232, innovation, LPC, mbed, NXP | Leave a comment

Pro-Mboard: Development Board for Mbed

We designed a board to help us in prototyping the Mbed board out side the bread-boards.When we started out prototyping using Mbed we realized that all the boards available for Mbed were either needed to shipped from outside or we … Continue reading

Rate this:

Posted in ARM, Design Challenge, Development Kit, electronics, embedded, FT232, innovation, LPC, mbed, NXP | Leave a comment

VI.K.A.S Updates – V

Getting slow on the updates.Well best is that VIKAS was selected for the LPC1100 Design Challenge in the Top 10 contestants for Phase III of the contest. However need to withdraw due to troublesome emails and calls from the website. … Continue reading

Rate this:

Posted in Design Challenge, electronics, embedded, innovation, LPC, LPC1100, VIKAS | 1 Comment

mbed Platform Review

I received an mbed kit from one of my friends. How luck I was, to discover this innovative new platform. It basically consists of LPC1768 NXP Semiconductor’s ARM Cortex-M3 microcontroller. The board is equipt will all sots of comm interfaces … Continue reading

Rate this:

Posted in ARM, Development Kit, innovation, LPC, NXP, open Source, software, Technology | Leave a comment

VI.K.A.S Updates – IV

Now Nokia 3310 LCD is working with multi-line display. Need to work on the Fonts side since they are too small. At least an 8×8 font is needed to have better user experience. Also working towards converting the conventional Reg … Continue reading

Rate this:

Posted in Design Challenge, electronics, embedded, innovation, LPC, LPC1100, VIKAS | Leave a comment

VI.K.A.S Updates – III

Now EEPROM 24LC16 I2C driver is working. Also the UART has come alive with both receive and transmit working. The PSU now uses a TPS7333 a nice 3.3V regulator from TI. Need to check out the display now.

Rate this:

Posted in Design Challenge, electronics, embedded, innovation, LPC, LPC1100, VIKAS | Leave a comment

VI.K.A.S Updates – II

Today the Serial port code is working with both receive as well as Transmit¬†happening¬†properly. I have fixed the keypad on the base board. Here is a picture of the setup. Next I need to connect the display. Also the charger … Continue reading

Rate this:

Posted in Design Challenge, electronics, embedded, innovation, LPC, LPC1100, VIKAS | Leave a comment

VI.K.A.S Updates – I

These are the Updates on the progress of my project VIKAS(VIllage Komputing Agricultural System): 20-MAY-2010:¬† Clock Out Code is now Working – Need to check for the Alternate Clock Sources and configuration 06-MAY-2010: Rearranged the SVN directories for better outlay … Continue reading

Rate this:

Posted in Design Challenge, electronics, embedded, innovation, LPC, LPC1100, VIKAS | 2 Comments

Cool ARM Board – "blueboard-lpc214x" MADE IN BHARATH

Today I came across a company known as NGX Technologies. For the fist time in Bharath this company has developed an completely open source ARM based development board. The board is called the “blueboard-lpc214x“.This board contains lots of useful features … Continue reading

Rate this:

Posted in ARM, electronics, LPC | Leave a comment